QuickJack 5000tl 5,000lb Portable Car Lift with 110V Power Unit

OK first I thought it was too big to work with my 911 and my Boxster but turns out works like a charm. I did not use the thread locker I use teflon tape and I kept it off the tip of the hydraulic lines worked like a charm I did have to go back and tighten one line and top off the fluid but what an awesome tool it’s gonna make my life a lot easier. Love it!!!

Price was good separate delivery of pump took awhile

The unit has great direction and requires very little assembly. Just have to put in hydraulic oil and hook us pressure hoses. Important to follow directions explicitly. You will need a compressor or method to air the tank with 50lbs of pressure. Two major issues that in hindsight would have me consider spending twice as much for a 4 post lift. The quick jack is unbelievably heavy and very difficult to move. Also the handle comes loose if you lift the jack up to high. Then it falls and can cause serious injury or property damage. This is not in instructions or warning.

This things are geat

5000TL jacks easily lifted a 4600lb 2002 Chevy Trailblazer. Installation note: install 90 degree hydraulic cylinder fittings into cylinders before attaching hose(as opposed to what instructions say). As the rubber blocks that come with the jacks won't work on pinchwelds, I used my table saw and cut 1" deep x 1/2" wide slots into the 3" blocks for those applications. Quick disconnect fittings are stiff to attach/disconnect, but do not seep at all when disconnected. Jacks are quite heavy, but are very well constructed. Very happy with my purchase.

The lift it is well made and sturdy. does a great job. Instructions are clear and well written. The lift will pay for itself by avoiding dealer prices for oil changes, brake jobs and general service work on our four vehicles. Few points that I would like to see improved. The quick detach couplers are far to stiff to push in to connect by average hands, I have had to spend $70 for a tool specifically designed for that purpose. I found it a bit of a struggle to position the lift sections into place. The supplied handles were of no use on low slung cars. I think a boat hook with long handle would aid pulling and pushing the lift sections into place from the rear of the vehicle. A piece of string with small hooks on each end should be included in the kit in order to simply pull the lift sections out from the rear.

Fantastic small lift! Master mechanic of 15+ years here and this lift is great. 2’ doesnt sound like a lot, but it is plenty of room to do whatever you need to. I too was skeptical about the height but seeing it in action shows that it’s enough. Super easy to setup, holds weight (per capacity) just fine, and super sturdy. You can disconnect the lines while its holding the vehicle without any leaks and move the motor away while you work. I do wish it had more than 2 locking points for more versatility, but hey, it still does just fine!

Found metal chip in connection and had to remove it. This is a inspection fail in your process. i should have never received it this way.. Now i see the same item that i purchased is $75.00 less. I want that discount..Please send me a credit for $75.00